Filmscanners mailing list archive (filmscanners@halftone.co.uk)
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: Tilted Scans (was: filmscanners: Vuescan feedback )
The Canon doesn't have an automatic frame advance, so I have to physically
remove the holder and adjust a slider for the next frame. I ALWAYS attempt
to remove the dust from the frame to be scanned. To me, it's not that big a
deal.
Bob Reilly
-----Original Message-----
From: Collin Ong [mailto:collin@pcocd2.intel.com]
Sent: Wednesday, March 07, 2001 3:12 PM
To: filmscanners@halftone.co.uk
Subject: RE: Tilted Scans (was: filmscanners: Vuescan feedback )
On Wed, 7 Mar 2001, Reilly, Bob wrote:
> I've found that with my Canon FS2710 that the negative holder "tilts"
> noticeably when a frame at either end is scanned. This is not too
...
> horizontal -- forget about the stick bending for this test). To solve
this
> "problem" I simply turned the scanner on its side so that the negative
> holder is now horizontal. Voila, with careful insertion, no more tilting!
But, now dust will settle on the exposed flat surface of the other frames
on the strip! This is such a problem with the Minolta Scan Dual II that I
turned that scanner sideways to avoid dust problems!
Collin
|
