Once the program loads, the opening screen looks normal and the SS4000 shows
up. In the past, I have seen the program delay opening when it can't find
the scanner. However, that isn't the problem here.
Now I have to make the decision whether to spend a bunch of time tinkering
to figure out why loading is slow--or just live with it for now.
Stan
-----Original Message-----
From: owner-filmscanners@halftone.co.uk
[mailto:owner-filmscanners@halftone.co.uk]On Behalf Of Bob Shomler
Sent: Tuesday, July 10, 2001 10:08 AM
To: filmscanners@halftone.co.uk
Subject: Re: filmscanners: VueScan and SS4000--second question
>The last two versions of VueScan are loading extremely slowly and also
>closing down slowly. It's taking about 20-30 seconds from clicking the icon
>to having the initial VueScan screen appear. It takes the program around 15
>seconds to close down now.
This happened once to me with a different model SCSI-attached scanner.
Problem was somehow in OS or HW communication with the scanner. When
Viescan does finish loading does it show the SS4000 scanner in the scan-from
menu in the device tab window or does it show (scan from) disk? Does the
problem not occur if you load an earlier Vuescan version?
--
Bob Shomler
