Filmscanners mailing list archive (filmscanners@halftone.co.uk)
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: filmscanners: Shadows and Scanwit 2720s
Hi Mark ...
I shall try moving the scanner and let you know...
> Sounds like dark noise from the CCD's, but could also be electronic >
interference. One thing you can try (but if you are down to dark noise it
is unlikely to help) - at the handle end of the slide holder, there is a
rectangular notched opening through which the Acer reads the lamp brightness
& colour before the scan
Yes this is strange then...and no, I'm not using grain rediction. I had
better check everything again, but I'm sure the settings werte normal.
another check though.
Thanks anyway..
Geoff
> >An aside...
> >Did a sharpness test on the Scanwit / 7.1.7 using Vuescans sharpening
> >tool...and
> >another test without sharpening. Without wins hands down. Sharpening is
> >definitely softer than without. Strange
>
> Very strange! I'm using 7.1.7/Scanwit also, but it works as
> advertised. Are you using the grain reduction at the same time perhaps?
>
> mark t
>
|
