Filmscanners mailing list archive (filmscanners@halftone.co.uk)
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: filmscanners: Best solution for HD and images
This isn't true.
The RAID controller or software does the work, and each channel has a
master and a slave as normal.
These days with 80-way IDE leads you might as well set both drives to
cable select and let the cable decide though.
jimsnyder@insight.rr.com (Jim Snyder) wrote:
> on 11/12/01 10:34 PM, LAURIE SOLOMON at LAURIE@advancenet.net wrote:
>
> >> Actually, both must be set up on the same IDE channel as masters.
> >
> > How does one do that? I thought that you could only have one master
> > device
> > per channel; and it was the one that was connected to the end of the
> > ribbon
> > cable and had its jumper set for master.
> >
> With two disks, you would be correct; but in this case, the two disks
> are
> going to act as one, so both must be set to be masters.
>
> Jim Snyder
>
>
|
