Don't the Sony and Mitsubishi use the same tubes?
rob
Bill Fernandez wrote:
> Florian--
>
> I have a Mitsubishi 2040U (replaced by the 2060U) and a Sony GDM
> F500R, both 21" monitors, sitting next to each other. Both have
> aperture grill CRTs.
>
> They both calibrate & profile nicely with OptiCal and the Monitor Spyder.
>
> But the Sony is very fuzzy (even at only 1280 x 1024) while the
> Mitsubishi is very sharp even at 1920 x 1440 (the highest my card
> goes).
>
> The Sony also needs its convergence adjusted more often, converges
> less precisely across the screen, and it's dark bias drifts both in
> color and intensity. It also cost significantly more than the
> Mitsubishi.
>
> Needless to say I'm very happy with the Mitsubishi and will avoid
> buying Sonys in the future.
>
> --Bill
>
> At 2:03 PM +0100 27-2-02, Florian Rist wrote:
> >Hi,
> >this is off-topic, but your comment would certainly be of great
> >value to me.
> >
> >I’m thinking about getting a new display. I’m studying
> >architecture an will uses the display for various work from CAD
> >to advanced digital imaging and DPT work. It will be connected
> >to a high end workstation running Windows 2000(VGA is a Elsa
> >GLoria III) and replace a 17” EIZO FlexScan T562-T. I’m
> >running a resolution of 1280x1024 pixels on this CRT and the
> >main reason I’d like to replace it is to be able to run a higher
> >resolution (the GLoria III supports up to 2048 x 1536 pixels).
> >
> >I’m looking to a high end 21-24” CRT. Any suggestions?
> >
> >
> >I took a closer look at the latest Eizo 21” CRTs Eizo F980 and
> >Eizo F956, the 21” Sony F520 and their 24” model FW900.
> >Any comments on these models? Any other models and brands
> >I should consider?
> >
> >
> >The problem is, I need a very high resolution for CAD
> >(>1600x1200) and excellent colour accuracy for DTP and
> >digital imaging work.
> >
> >
> >I’m looking forward to read your comments.
> >
> >cu
> >Flo
> >
> >
> >
>
>>----------------------------------------------------------------------------------------
> >Unsubscribe by mail to listserver@halftone.co.uk, with 'unsubscribe
> >filmscanners'
> >or 'unsubscribe filmscanners_digest' (as appropriate) in the message
> >title or body
>
> --
>
> ======================================================================
> Bill Fernandez * User Interface Architect * Bill Fernandez Design
>
> (505) 346-3080 * bill_sub@billfernandez.com *
> ======================================================================
>
----------------------------------------------------------------------------------------
Unsubscribe by mail to listserver@halftone.co.uk, with 'unsubscribe
filmscanners'
or 'unsubscribe filmscanners_digest' (as appropriate) in the message title or
body
