[filmscanners] RE: Scanner calibration

["Alex Zabrovsky" <alexz@zoran.co.il>]

Thanks Lauri, but would it be hardware reason the output would be wrong
completely with either
Nikon CMS On or Off.
In my case, switching the Nikon CMS off results in near-to-be color balanced
scans featured by slight green tint (barely visible sometimes), which is
nice considering the output wasn't color processed in software yet.
Also, playing with profiling last weekend I incidentally tried LS2000/LS30
profile which is installed automatically into the OS upon Nikon Software
installation besides of
profiles for LS4000/LS40 and LS8000.
I didn't pay attention on these until last Friday, and then being tired from
all this profiling struggle I tried the LS2000/LS30 profile and that amazed
me. This one worked much better then either LS4000/LS40, LS8000 or Nikon CMS
being ON !
The problem is as follows as for my understanding: the unprocessed data out
of the scanner delivers slightly greenish scans. The Nikon CMS tries to
compensate for it adding substantial amount of pinkish tint which is way too
much ending with heavy pink tinted image.
So do the LS4000/LS40 and LS8000 profiles supplied with the Nikon driver.
On the other hand, the LS2000/LS30 profile adds very delicate pink/orage
tint in the amount which is just enough to compensate that green cast the
hardware output is featured by.
That seems to work quite well for me, so I worked out my procedure:
scanning into Photoshop with Nikon CMS off on the permanent manner, and then
performing Assign profile for LS2000/LS30.
After that the results obtained seems to be as 99 % neutral as would be
expected initially and are starting point for ordinary further manual
processing of necessary.

Regards,
Alex Z

-----Original Message-----
From: filmscanners_owner@halftone.co.uk
[mailto:filmscanners_owner@halftone.co.uk]On Behalf Of Laurie Solomon
Sent: Thursday, April 25, 2002 7:42 PM
To: alexz@zoran.co.il
Subject: [filmscanners] RE: Scanner calibration


Just speculation; but the pinkish cast could be possibly dou to a change in
the power current used to run the scanner; do you suffer any recent and
unusual fluxes in your electric power such as brownouts?  It also may be
cuased by a bad or deteriorating light source (e.g., a bad or deteriorating
LED or fluorescent tube in the scanner which is giving off a slightly
different color or color temperature).

-----Original Message-----
From: filmscanners_owner@halftone.co.uk
[mailto:filmscanners_owner@halftone.co.uk]On Behalf Of Alex Zabrovsky
Sent: Thursday, April 25, 2002 6:14 AM
To: laurie@advancenet.net
Subject: [filmscanners] RE: Scanner calibration


Yes, I also used to work with Adobe 98 in both Nikon 3.1.2 and Photoshop
delivering good, well balanced results, until recently the scanner began to
deliver pinkish scans with which I'm struggling till now...


Regards,
Alex Z

-----Original Message-----
From: filmscanners_owner@halftone.co.uk
[mailto:filmscanners_owner@halftone.co.uk]On Behalf Of Anthony Atkielski
Sent: Wednesday, April 24, 2002 10:08 PM
To: alexz@zoran.co.il
Subject: [filmscanners] Re: Scanner calibration


Alex writes:

> If so, it seems I'll have to turn the Nikon
> CMS off permanently.

I've always had it turned off in Nikon Scan 2.x, as it just messes up too
many things.  It seems to work okay in Nikon Scan 3.1.2; I have the color
space set to Adobe 1998 (the same space I use in Photoshop).

----------------------------------------------------------------------------
------------
Unsubscribe by mail to listserver@halftone.co.uk, with 'unsubscribe
filmscanners'
or 'unsubscribe filmscanners_digest' (as appropriate) in the message title
or body

----------------------------------------------------------------------------
------------
Unsubscribe by mail to listserver@halftone.co.uk, with 'unsubscribe
filmscanners'
or 'unsubscribe filmscanners_digest' (as appropriate) in the message title
or body

----------------------------------------------------------------------------
------------
Unsubscribe by mail to listserver@halftone.co.uk, with 'unsubscribe
filmscanners'
or 'unsubscribe filmscanners_digest' (as appropriate) in the message title
or body

----------------------------------------------------------------------------------------
Unsubscribe by mail to listserver@halftone.co.uk, with 'unsubscribe 
filmscanners'
or 'unsubscribe filmscanners_digest' (as appropriate) in the message title or 
body