Filmscanners mailing list archive (filmscanners@halftone.co.uk)
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[filmscanners] RE: Which SCSI Card for SS4000
My instructions indicated that but since it didn't work with the 25pin
connector and did work with the SCSI 1 I thought that there was a type in
the instructions. Both cables were okay so I don't know what the problem
might be.
-----Original Message-----
From: filmscanners_owner@halftone.co.uk
[mailto:filmscanners_owner@halftone.co.uk]On Behalf Of Austin Franklin
Sent: Monday, September 09, 2002 3:33 PM
To: TMaugham@yahoo.com
Subject: [filmscanners] RE: Which SCSI Card for SS4000
Tom,
> The input is a SCSI 1 cable (50 pin) the output (to another SCSI
> device) is
> 25 pin.
I believe either can be used to connect to the SCSI card.
Austin
----------------------------------------------------------------------------
------------
Unsubscribe by mail to listserver@halftone.co.uk, with 'unsubscribe
filmscanners'
or 'unsubscribe filmscanners_digest' (as appropriate) in the message title
or body
----------------------------------------------------------------------------------------
Unsubscribe by mail to listserver@halftone.co.uk, with 'unsubscribe
filmscanners'
or 'unsubscribe filmscanners_digest' (as appropriate) in the message title or
body
|
