[filmscanners] Re: Newbie needs purchase advice

["Michel Hendriksen" <michel.hendriksen@xs4all.nl>]

Should not matter whether they are on MoBo or PCI card. What would be the
use of these PCI cards then?

Michel Hendriksen

----- Original Message -----
From: "Maaki" <maaki@pacbell.net>
To: <michel.hendriksen@xs4all.nl>
Sent: Tuesday, May 20, 2003 2:28 PM
Subject: [filmscanners] Re: Newbie needs purchase advice


> Thanks both for the replies.
>
> The transparencies are 4"x5" and 6x7cm, (120 roll film).
>
> The Epson site lists the following Macintosh Requirements for the 3200.
>
> *iMac or any G3 or G4 with built-in USB.
> USB: Mac OS 8.6 to 9.x, OS X 10.1.3 or later.
> IEEE 1394 (FireWire): Mac OS 8.6 to 9.x
> (FireWire updater 2.1 or later required),
>
> Does anyone know if USB and Firewire has to be on the motherboard? In
other words, will the Epson 3200 scanner work if USB and FW are on PCI
cards, (in a PM 9500)?
>
> -Maaki
>
>
>         =====================================
>  ---At 6:54 PM +0900 5/20/03, David J. Littleboy wrote:---
>
> >For your needs and price range, the 3200 is pretty much the only option.
It
> >handles up to 4x5 (inches) without problem.
>
>          =====================================
>  ---At 2:16 AM -0700 5/20/03, Arthur Entlich wrote:---
> >
> >Also, many of the flatbeds scanners cannot scan film over about maybe
> >5cm x 8 cm, other than in sections.  I am not sure if you were referring
> >to transparencies of 4" x 5" or 4cm x 8cm, or 6cm by 7cm.
>
>
> --------------------------------------------------------------------------
--------------
> Unsubscribe by mail to listserver@halftone.co.uk, with 'unsubscribe
filmscanners'
> or 'unsubscribe filmscanners_digest' (as appropriate) in the message title
or body
>
>

----------------------------------------------------------------------------------------
Unsubscribe by mail to listserver@halftone.co.uk, with 'unsubscribe 
filmscanners'
or 'unsubscribe filmscanners_digest' (as appropriate) in the message title or 
body