[filmscanners] RE: Nikon LS30 & Vista

["Laurie@advancenet.net" <laurie@advancenet.net>]

You are not going to like this suggestion; but have you considered buying a
new more recent SCSI card from Adaptec which may have drivers that will work
for that SCSI card.  If it is an older or proprietary SCSI card, you may
just be out of luck trying to get drivers for it.

By the way how does your old Epson connect to the computer (via SCSI)?  If
so, can you daisy chain the LS30 to the SCSI card that the flatbed is
connected to?

> -----Original Message-----
> From: filmscanners_owner@halftone.co.uk
> [mailto:filmscanners_owner@halftone.co.uk] On Behalf Of David
> Sent: Sunday, June 10, 2007 2:01 PM
> To: laurie@advancenet.net
> Subject: [filmscanners] Re: Nikon LS30 & Vista
>
> No I installed vista ultimate 32bit not 64bit.
> Even my old flatbed Epson perfection 1200 installs from the disc, twain
> works perfectly in Photoshop.
> In device manager the SCSI controller has the exclamation mark showing
> and
> no amount of trying to install any Adaptec driver ( as for XP ) will
> work.
> As you say Laurie, Vista just doesn't recognize the SCSI card.
> I've found that for most things that Vista doesn't like, by installing
> in
> compatibility mode, seems to get around them.
>
> You guys here were my last resort !!!!!
>
> David.
>
>
> ----- Original Message -----
> From: "Laurie@advancenet.net" <laurie@advancenet.net>
> To: <David.jc@blueyonder.co.uk>
> Sent: Sunday, June 10, 2007 7:13 PM
> Subject: [filmscanners] RE: Nikon LS30 & Vista
>
>
> As a note, at this point in time, there are little by way of drivers
> for
> scanners (or printers, for that matter)  on the market for Vista X64
> OSs -
> or for that matter XP X64 OSs.  As for ASPI Layers, Microsoft also is
> displaying little interest in supporting them in the future -
> especially for
> X64 systems.
>
> I have been able to get a Umax Powerlook II SCSI flatbed Scanner to
> work
> under Vista X32 using the  old XP X32 Twain driver that came with
> scanner
> without problems; but that X32 bit driver will not work with an X64 bit
> OS.
>
> I have to wonder if your X64 Vista system even recognizes the SCSI card
> -
> let alone the scanner attached to it.  If it does recognize the SCSI
> card,
> than the ASPI layer may not be the problem; the scanner driver may be
> the
> problem, since it probably is a 32 bit TWAIN driver.  There never has
> been,
> I am told, a 64 bit twain driver written for public release.
>
> > -----Original Message-----
> > From: filmscanners_owner@halftone.co.uk
> > [mailto:filmscanners_owner@halftone.co.uk] On Behalf Of
> > lists@lazygranch.com
> > Sent: Sunday, June 10, 2007 10:14 AM
> > To: laurie@advancenet.net
> > Subject: [filmscanners] Re: Nikon LS30 & Vista
> >
> > I use a Minolta Dimage 5400 II running under X64 (precursor to
> Vista).
> > It is USB interfaced, so SCSI isn't exactly an issue. However,
> > technically ASPI is still required. This is a problem with X64
> > (probably
> > Vista, but I have no first hand knowledge of this). With a bit of
> > googling, I found a thread on how to install the 32 bit ASPI on a 64
> > bit
> > OS. Adaptec has little interest in supporting ASPI.
> >
> > David wrote:
> >
> > >Thanks Tony and Arthur for the replies,
> > >
> > >I e-mailed Ed. and according to him also, it should work. I had no
> > luck.
> > >Even though I've tamed Vista to my liking, this is the only thing I
> > can't
> > >do.
> > >As the Scanner plugs into the SCSI card it presumably has to have a
> > driver
> > >to work.
> > >I've googled and seems like nobody has been able to get a LS30 to
> work
> > with
> > >Vista.
> > >A shame really, as although I'm digital, Canon DSLR I still have a
> few
> > years
> > >worth of slides to scan, so I'll have to keep XP until I've
> finished.
> > >
> > >David.
> > >
> > >
> > >----- Original Message -----
> > >From: "Arthur Entlich" <artistik@shaw.ca>
> > >To: <David.jc@blueyonder.co.uk>
> > >Sent: Sunday, June 10, 2007 10:49 AM
> > >Subject: [filmscanners] Re: Nikon LS30 & Vista
> > >
> > >
> > >Can you use Vuescan, which seems to have gotten around the SCSI api
> > and
> > >OS issue?
> > >
> > >Art
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
> >
> > ---------------------------------------------------------------------
> --
> > -----------------
> > Unsubscribe by mail to listserver@halftone.co.uk, with 'unsubscribe
> > filmscanners'
> > or 'unsubscribe filmscanners_digest' (as appropriate) in the message
> > title or body
>
>
> -----------------------------------------------------------------------
> -----------------
> Unsubscribe by mail to listserver@halftone.co.uk, with 'unsubscribe
> filmscanners'
> or 'unsubscribe filmscanners_digest' (as appropriate) in the message
> title
> or body
>
>
>
>
>
> -----------------------------------------------------------------------
> -----------------
> Unsubscribe by mail to listserver@halftone.co.uk, with 'unsubscribe
> filmscanners'
> or 'unsubscribe filmscanners_digest' (as appropriate) in the message
> title or body


----------------------------------------------------------------------------------------
Unsubscribe by mail to listserver@halftone.co.uk, with 'unsubscribe 
filmscanners'
or 'unsubscribe filmscanners_digest' (as appropriate) in the message title or 
body