На RSP2 грузится без проблем, правда IOS 12.0
>sh ver
Cisco Internetwork Operating System Software
IOS (tm) RSP Software (RSP-PV-M), Version 12.0(25)S3, EARLY DEPLOYMENT RELEASE
SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Mon 23-Feb-04 20:00 by nmasa
Image text-base: 0x40010F58, data-base: 0x411F8000
ROM: System Bootstrap, Version 11.1(2) [nitin 2], RELEASE SOFTWARE (fc1)
BOOTLDR: RSP Software (RSP-BOOT-M), Version 12.0(22)S4, EARLY DEPLOYMENT
RELEASE SOFTWARE (fc2)
ats44-1 uptime is 3 weeks, 1 day, 23 hours, 1 minute
System returned to ROM by bus error at PC 0x4024BFB8, address 0x4 at 15:51:53
NOVST Mon Oct 4 2004
System restarted at 11:07:26 NOVST Tue Oct 26 2004
System image file is "disk0:rsp-pv-mz.120-25.S3.bin"
cisco RSP2 (R4600) processor with 131072K/2072K bytes of memory.
R4600 CPU at 100Mhz, Implementation 32, Rev 2.0
Last reset from power-on
G.703/E1 software, Version 1.0.
G.703/JT2 software, Version 1.0.
X.25 software, Version 3.0.0.
Chassis Interface.
1 FSIP controller (8 Serial).
1 VIP2 controller (1 FastEthernet).
1 FastEthernet/IEEE 802.3 interface(s)
8 Serial network interface(s)
123K bytes of non-volatile configuration memory.
15616K bytes of ATA PCMCIA card at slot 0 (Sector size 512 bytes).
8192K bytes of Flash internal SIMM (Sector size 256K).
No slave installed in slot 3.
Configuration register is 0x2102
On 17-Nov-2004 Pavel D.Kuzin wrote:
> Добрый день!
>
> Прошу прощения, не заметил.
>
> Если мне не изменяет моя память, RSP4 не умеет грузить с ATA Flash.
> Это умеют RSP8 и выше.
>
> --
> Pavel D.Kuzin
> System Administrator
> Nodex ISP
> St. Petersburg, Russia
> pk@xxxxxxxx
> http://nodex.ru
> ----- Original Message -----
> From: "Yury Yaroshevsky" <yk@xxxxxxxxxxx>
> To: <inet-admins@xxxxxxxxxxxx>
> Sent: Tuesday, November 16, 2004 11:56 AM
> Subject: [inet-admins] Проблема загрузки с ATA Flash Card на 7500 ..
>
>
>> Добрый день.
>>
>> В наличии есть 7505 :
>>
>> Cisco Internetwork Operating System Software
>> IOS (tm) RSP Software (RSP-PV-M), Version 12.2(27), RELEASE SOFTWARE (fc3)
>> Copyright (c) 1986-2004 by cisco Systems, Inc.
>> Compiled Tue 02-Nov-04 18:02 by kellmill
>> Image text-base: 0x40010948, data-base: 0x41188000
>>
>> ROM: System Bootstrap, Version 12.0(10r)S1, RELEASE SOFTWARE (fc1)
>>
>> router uptime is 13 hours, 28 minutes
>> System returned to ROM by reload ...
>> System restarted at ...
>> System image file is "slot0:rsp-pv-mz.122-27.bin"
>>
>> cisco RSP4+ (R5000) processor with 262144K/2072K bytes of memory.
>> R5000 CPU at 200Mhz, Implementation 35, Rev 2.1, 512KB L2 Cache
>> Last reset from power-on
>> G.703/E1 software, Version 1.0.
>> G.703/JT2 software, Version 1.0.
>> X.25 software, Version 3.0.0.
>> Bridging software.
>> Chassis Interface.
>> 1 VIP4-80 RM7000 controller (2 FastEthernet).
>> 2 FastEthernet/IEEE 802.3 interface(s)
>> 123K bytes of non-volatile configuration memory.
>>
>> 20480K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).
>> 31488K bytes of ATA PCMCIA card at slot 1 (Sector size 512 bytes).
>> 8192K bytes of Flash internal SIMM (Sector size 256K).
>> Configuration register is 0x2102
>>
>> В нее установлен 32M ATA Flash Card (Transcend TS32MFLASHA).
>> Он был нормально отформатирован. Таже на него без проблем
>> был залит IOS:
>>
>> router#dir disk1:
>> Directory of disk1:/
>>
>> 1 -rw- 17949556 Nov 15 2004 20:33:00 +02:00
> rsp-pv-mz.122-18.S6.bin
>> 2 -rw- 267153 Nov 15 2004 20:47:46 +02:00 startup-config
>>
>> 31981568 bytes total (13762560 bytes free)
>>
>> Но вот при попытке загрузиться с него получаю:
>>
>> System Bootstrap, Version 12.0(10r)S1, RELEASE SOFTWARE (fc1)
>> Copyright (c) 2000 by cisco Systems, Inc.
>>
>> SLOT 6 RSP is system master
>> RSP4 platform with 262144 Kbytes of main memory
>>
>> AUTOBOOTVAR (BOOT) env variable isn't set. Please set it to point to a
>> non null string. Attempting to load the first image in disk0 or slot0.
>>
>> ATA_Status time out waiting for busy bit to clear.
>> loadprog: error - on load of image from file system with monlib
>> boot: cannot load "disk0:"
>>
>> В bootflash лежит:
>>
>> border0#sh bootflash:
>> -#- ED ----type---- --crc--- -seek--
> nlen -length- ---------date/time--------- name
>> 1 .. image 7ED8902D 7279D4 22 7240020 Nov 8 2004 21:40:31
> +02:00 rsp-boot-mz.122-27.bin
>>
>> 362028 bytes available (7240148 bytes used)
>>
>> Кто нибудь пытался использовать Transcent ATA Flash Card для
>> работы на 7500 платформе? Чего делать то посоветуете?
>>
>> --
>> YY18-RIPE
>> --
>> YY18-RIPE
>>
>>
> ============================================================================
> =
>> "inet-admins" Internet access mailing list. Maintained by East Connection
> ISP.
>> Mail "unsubscribe inet-admins" to Majordomo@xxxxxxxxxxxx if you want to
> quit.
>> Archive is accessible on http://info.east.ru/rus/inetadm.html
>>
>
>
> =============================================================================
> "inet-admins" Internet access mailing list. Maintained by East Connection ISP.
> Mail "unsubscribe inet-admins" to Majordomo@xxxxxxxxxxxx if you want to quit.
> Archive is accessible on http://info.east.ru/rus/inetadm.html
--
Dmitry Klochihin, NOC, Rinet Corp., Novosibirsk, Russia
NOC Support: +7(383-2) 54-89-32
=============================================================================
"inet-admins" Internet access mailing list. Maintained by East Connection ISP.
Mail "unsubscribe inet-admins" to Majordomo@xxxxxxxxxxxx if you want to quit.
Archive is accessible on http://info.east.ru/rus/inetadm.html