Filmscanners mailing list archive (filmscanners@halftone.co.uk)
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: filmscanners: Win2K system requirements
Michael Wilkinson wrote:
>
> ----- Original Message -----
> From: "IronWorks" <ironworks@ameritech.net>
>
> : Ok - I was confused. I was referring to 100 MHz DIMMs v. 133 MHz
> DIMMs. I
> : take it Win2K works fine with 100 MHz DIMMs?
> #######################################
> Yes,but your motherboard governs the speed of the memory ,not your CPU.
> The actual difference in the speed between them is in nanoseconds and
> not a lot of them either.
> regards
> Michael Wilkinson. 106 Holyhead Road,Ketley, Telford.Shropshire TF 15 DJ
> michael@infocus-photography.co.uk www.infocus-photography.co.uk
> For Trannies and Negs from Digital Files.
Actually only newer Pent-III supports 133MHz front side bus speed. If you
look carefully at the fine print on the chip it should be like 533/512/133.
This means the CPU's speed is 533MHz with 512KB L2 cache and the front side
bus is 133MHz. There is a little trick, 533/256/133 is actually faster
than 533/512/133. 533/256/133 is one of the latest P-III on which the L2
cache is smaller but it runs at 533MHz. The 533/512/133's L2 cache runs at
133MHz only.
Quoton
|
