[filmscanners] Re: Which SCSI Card for SS4000

["Arthur Entlich" <artistic-1@shaw.ca>]

On behalf of my friend, I'd like to thank everyone who answered this
question.  I understand he has acquired a card and cable now and asked
me to forward his thanks.

Thanks again all,

Art

Kapetanakis, Constantine wrote:

> The scanner will work with most if not all SCSI cards. It was extensively
> tested with Adaptec and Advansys cards.
> The scanner will accept both 25 pin and 50 pin cables.
>
> -----Original Message-----
> From: Arthur Entlich [mailto:artistic-1@shaw.ca]
> Sent: Friday, September 06, 2002 9:25 PM
> To: KAPETAC@polaroid.com
> Subject: [filmscanners] Which SCSI Card for SS4000
>
>
>
> Someone who is not yet subscribed here is buying a SS4000 scanner and
> wanted to know which is the best SCSI card to use with the scanner on a
> PC, with, I assume, PCI interfacing.
>
> Also, he was wondering which type of SCSI cable he needs (he wanted to
> pre-purchase the cable, as it isn't coming with the purchase).
>
> What SCSI II cable plug does the scanner use, and what is required on
> the Card end?
>
> I haven't used an SS4000, only the SS4000+ which uses USB and Firewire,
> and I can't recall what the SS4000 "rear" looks like.
>
> Thanks,
>
> Art
>


----------------------------------------------------------------------------------------
Unsubscribe by mail to listserver@halftone.co.uk, with 'unsubscribe 
filmscanners'
or 'unsubscribe filmscanners_digest' (as appropriate) in the message title or 
body