Brian -
I don't know how much help I can be, but I'm glad to try. I recently
switched to a machine running WinME, and my FS2710 seems to be
working with Vuescan. I didn't ever have to download ASPI, so the
modules you list are not loaded on my system. I have the same SCSI
controller, and it shows under the device manager. The driver is
simply listed as provided by MS.
(The only thing that's a little different is I notice that Vuescan is
no longer giving dpi, size and progress data on the task bar.
However, when I re-installed it on my new system from Ed's site, it
was of course an upgraded version, so I'm not sure if this is peculiar
to my system or not. Anybody?
I'm not a techie or a programmer, but feel free to ask me to llok up
any settings that might help, since I'm running the same OS/scanner/SW
combo.
On Sun, 22 Dec 2002 21:11:14 -0800, you wrote:
>I have returned to trying to get my FS2710 tow work on Win ME. Neither
>Canoscan nor Vuescan sees it.
>
>The Adaptec ASPI has been loaded as per the instructions. When I use the
>Adaptec supplied aspi check utility it shows that the ASPI module versions
>are as follows:
>
>APIX.VXD 4.71.1
>WNASPI32.DLL 4.71.1
>
>It also says that the aspi is properly installed and fully
>functional. However, when I use the system information ("Help and
>Support") program to show the loaded modules, neither of these show up!
>
><<<Can someone who has made this software work on Win ME check and see if
>these modules show up? To get to the system infomation utility use
>start>programs>accessories>System Tools>System Information >>>
>
>Other info:
>
>Hardware info shows the SCSI card as:
>
>Name Adaptec AIC-7850 PCI SCSI Controller
>Manufacturer Adaptec
>Status OK
>IRQ Channel IRQ 11
>Memory Address 0xEF102000-0xEF102FFF
>I/O Port 0xD400-0xD4FF
>Driver c:\windows\system\vmm32.vxd (, 1,008.75 KB (1,032,956 bytes), Not
>Available)
>
>Additionally, the control panel>system>device driver>SCSI dialog shows that
>there are two driver files associate with the AIC-7850:
>
> AIC78XX.MPD version 1.30 from Adaptec
> vmm32vxd version and source unknown
>
>Additional help in debugging this would be appreciated.
>FYI, Vuescan works normally when used with the epson 2450.
>
>
>----------------------------------------------------------------------------------------
>Unsubscribe by mail to listserver@halftone.co.uk, with 'unsubscribe
>filmscanners'
>or 'unsubscribe filmscanners_digest' (as appropriate) in the message title or
>body
Ken Durling
Visit my new easier-to-browse PhotoSIG portfolio:
----------------------------------------------------------------------------------------
Unsubscribe by mail to listserver@halftone.co.uk, with 'unsubscribe
filmscanners'
or 'unsubscribe filmscanners_digest' (as appropriate) in the message title or
body
