[filmscanners] RE: debugging Canon FS 2710 on Windows ME

["Richard Savenije" <r.savenije@xs4all.nl>]

After installing the drivers and the aspi module, did you use the
Scfs_cfg.exe program to configure the scsi card? It is included in the
Driver package

> -----Oorspronkelijk bericht-----
> Van: filmscanners_owner@halftone.co.uk
> [mailto:filmscanners_owner@halftone.co.uk] Namens Bryan Lyles
> Verzonden: maandag 23 december 2002 6:11
> Aan: r.savenije@xs4all.nl
> Onderwerp: [filmscanners] debugging Canon FS 2710 on Windows ME
> 
> I have returned to trying to get my FS2710 tow work on Win ME.   Neither
> Canoscan nor Vuescan sees it.
> 
> The Adaptec ASPI has been loaded as per the instructions.  When I use the
> Adaptec supplied aspi check utility it shows that the ASPI module versions
> are as follows:
> 
> APIX.VXD         4.71.1
> WNASPI32.DLL 4.71.1
> 
> It also says that the aspi is properly installed and fully
> functional.  However, when I use the system information ("Help and
> Support") program to show the loaded modules, neither of these show up!
> 
> <<<Can someone who has made this software work on Win ME check and see if
> these modules show up?  To get to the system infomation utility use
> start>programs>accessories>System Tools>System Information    >>>
> 
> Other info:
> 
> Hardware info shows the SCSI card as:
> 
> Name  Adaptec AIC-7850 PCI SCSI Controller
> Manufacturer  Adaptec
> Status        OK
> IRQ Channel   IRQ 11
> Memory Address        0xEF102000-0xEF102FFF
> I/O Port      0xD400-0xD4FF
> Driver        c:\windows\system\vmm32.vxd (, 1,008.75 KB (1,032,956
bytes),
> Not
> Available)
> 
> Additionally, the control panel>system>device driver>SCSI dialog shows
> that
> there are two driver files associate with the AIC-7850:
> 
>     AIC78XX.MPD  version 1.30 from Adaptec
>     vmm32vxd  version and source unknown
> 
> Additional help in debugging this would be appreciated.
> FYI, Vuescan works normally when used with the epson 2450.
> 
> 
> --------------------------------------------------------------------------
> --------------
> Unsubscribe by mail to listserver@halftone.co.uk, with 'unsubscribe
> filmscanners'
> or 'unsubscribe filmscanners_digest' (as appropriate) in the message title
> or body

----------------------------------------------------------------------------------------
Unsubscribe by mail to listserver@halftone.co.uk, with 'unsubscribe 
filmscanners'
or 'unsubscribe filmscanners_digest' (as appropriate) in the message title or 
body